Overhead real time inventory: AdvanTrack-200 TM

ADSF 200.01 2.1space-wide-3

AdvanTrack is an RFID-based system that provides inventory in real time of all tagged items located in a given space. Examples of such spaces are retail stores, small warehouses, hospital areas, etc.

AdvanTrack also supplies the approximate location of each tagged item in real time.

AdvanTrack comprises a set of overhead antennas, spaced approximately 1.5 m x 1.5 m, connected to RFID multiplexers, which are in turn connected to RFID readers.

Each antenna covers an area of approximately 3 metres diameter, and detects the tags located under its area of interrogation. The antennas are usually sequentially activated, obtaining the identification and position of each tagged item every few seconds

Business benefits of AdvanTrack :

  • Reduction of out-of-stocks and misplaced items
  • Fast location of products
  • Persistent inventory
  • Shrinkage reduction

Download AdvanTrack data sheet  


Operating Frequency EU Version 865 - 868 MHz (ETSI EN 302 208)
Operating Frequency US Version 902 - 928 MHz (FCC part 15)
RF Power output Adjustable from 5 dBm to 31.5 dBm (1.4W) with +/-0.5 dBm accuracy above +15 dBm
Maximum power may have to be reduced to meet regulatory limits
Standard Compliance EPCglobal Gen2 (ISO 18000-6C)
Operating Detection distance Up to 6 metres. Recommended: up to 4 metres
Location resolution Typical 2 m x 2 m
Radiation pattern Pencil beam
Beam width 90° / 90°
Sidelobe level <-15 dB
Polarization Circular
Data and control interface RJ45 (10/100 Base-T Ethernet)
Connectors MCX
Power supply Power over Ethernet
Temperature range -20°C to +50°C
Dimensions of one antenna 420 mm x 420 mm x 15 mm
Weight of one antenna 900 g