Overhead anti-theft / loss prevention system: AdvanSafe TM

loss-prevention-1 AdvanSafe-100       

AdvanSafe is an anti-theft / loss prevention system based on RFID UHF. It comprises an antenna with an embedded reader, controller and alarm combining loss prevention and RFID functions in one system.

AdvanSafe AdvanSafe detects the tagged items that pass below the antenna, verify if those items have been paid, and sounds an alarm if any item has not been paid.

AdvanSafe comprises a master unit and several slave units:

  • The master unit has an integrated reader, a controller, an alarm, a visual alarm indicator and one directive antenna.
  • Each slave unit comprises one directive antenna and a visual alarm indicator.

By using AdvanSafe it is no longer necessary to install two technologies for using EAS and RFID functions in one single shop.

Business benefits of AdvanSafe :

  • Combination of loss prevention and RFID in one system, which reduces labeling costs
  • Improved store aesthetics, by having an open entrance area in the shop (no antennas on the floor)
  • Improved customer experience, since tags are very thin and can be embedded in labels (for apparel). This allows the customer to try on a garment without suffering the annoyance of a traditional EAS mechanisms
  • Shrinkage reduction
  • Provides data to detect which products suffer more theft attempts, which allows to take corrective actions
  • Statistics of EAS alarms
  • Plug and play installation

Download AdvanSafe data sheet  


Operating Frequency ETSI (EU) (865.6 - 867.6) MHz
FCC (NA, SA) (902 – 928) MHz
TRAI(India) (865 - 867) MHz
MIC (KR) (910 – 914) MHz
ACMA (AU) (920 – 926) MHz
NZ (New Zealand) (922 - 927) MHz
SRRC-MII (P.R.China) (920 – 925) MHz
Brazil (902 – 907.5) MHz and (915 - 928) MHz
Peru (916 – 928) MHz
Detection Height 2 - 3 m (recommended)
Maximum: 4 m
(Use above heights with caution. Read distance depends highly on tag model and products being used)
Detection Ground Width up to 3 m
Alarm Light Light Emitting Diode (LED)
Alarm Audio Signal Buzzer
Radiation angle Fan shape
20° (narrow direction) / 90° (broad direction)
-15 dB side lobes
Alarm function Preset System gives audio alarm and light by detection of any of the EAS supported modes
Power supply Power over Ethernet
Optional: External power supply
Energy Consumption 6 W max., 1,5 W stand by, 0,5 W sleep modus, <5µA power down
Reader Power max. 31,5 dBm
Radiated power 2 W ERP, 3.2 W EIRP
Anticollision Yes
Interface Ethernet
Transponder Protocol Standard EPC Class1 Gen2
Conformity EN 50364, EN 301 489, EN 302 208 (LBT), EN 300
Temperature range -20°C to +55°C
Dimensions 880 mm x 220 mm x 56 mm
34.6 inches x 8.7 inches x 2.2 inches
Antenna weight Master unit: 4.300 g
Slave unit: 3.900 g>
Material Housing Aluminium and methacrylate
Color Off white
Human exposure EN 50364
EMC EN 301 489, EN 300 220
Air Interface (EU) EN 302 208 v1.2 (DRM)