RFID reader for points of sale: AdvanPay-110 TM

DSC 5186


AdvanPay-110 is a high power RFID UHF reader that integrates:

  • An antenna with a highly confined reading area
  • Keyboard emulation by hardware. It's not needed to install any software at the POS
  • Functionalities specifically designed to address the needs of staff at retail stores, libraries or other spaces

AdvanPay-110 comes in two models:

  1. Flush mount (installed recessed in surface)
  2. Under table mount (installed underneath the surface)

AdvanPay can also be connected to an external speaker to increase the volume of the beep and to an external controller for changing the operation mode (in under table mount version), and for turning AdvanPay on and off.

DSC 0111trial-lq DSC 0234lqDSC 0254lq

Benefits of AdvanPay-110 :

  • highly controlled reading area 
  • automatic integration with most software applications, through hardware keyboard emulation
  • easy installation and monitoring

For retailers:

  • queues reduction, thanks to a much faster payment process
  • improvement in the customer shopping experience derived from a shorter payment time
  • reduction in employee costs
  • simultaneous item detection and EAS flag activation/deactivation

Download AdvanPay-110 data sheet  


Frequency FCC (NA, SA) (917.4 – 927.2) MHz
ETSI (EU) (865.6 - 867.6) MHz
TRAI(India) (865 - 867) MHz
KCC (Korea) (917 – 923.5) MHz
MIC (Japan) (916.9 – 923.4) MHz
ACMA (AU) (920 – 926) MHz
NZ (New Zealand) (922 - 927) MHz
SRRC-MII (P.R.China) (920.125 – 924.875) MHz
Brazil (917.4 – 927.2) MHz by using channel selection
Chile(917.4 – 927.2) MHz by using channel selection
Peru (917.4 – 927.2) MHz by using channel selection
Taiwan (922.600 – 927.2) MHz by using channel selection
Open Region (859 – 873) MHz and (915 – 930) MHz
(by using channel selection)
RF Power Programmable from 5 dBm to 27 dBm in 0.5 dBm steps
Antenna Integrated Circular Polarized Antenna
Standard Compliance EPC C1 G2/ISO 18000-6C
Data communications Ethernet:  IEEE 802.3 up to 100 Mbps
Power supply Power Over Ethernet (PoE): IEEE 802.3af and 802.3at (Type I & Type II)
On-board battery for RTC chip
On-board LED indicators Three LED for each operation mode:
  • The enabled LED shows the active mode
  • A flashing LED means tags are being read
Configurator and keyboard emulator Included via web interface
Compatibility with software applications Can be easily integrated with any application software, through keyboard wedge
Power consumption Idle consumption < 3 W
Max consumption (@27 dBm) <14 W
Temperature range -20°C to +50°C
Dimensions (table flush mount) 143 x 200 x 58 mm (5.6 x 7.9 x 2.3 inches)
Dimensions (under table mount) 143 x 143 x 53 mm (5.6 x 5.6 x 2.1 inches)
Weight (table flush mount) 870 g (approx.)
Weight (under table mount) 650 g (approx.)