RFID connection boards: AdvanGPIO TM 

advangpio

AdvanGPIO is a connection board that makes it very easy to control some Keonn products through the GPIO (General Purpose Input Output) of many RFID UHF reader models.

AdvanGPIO allows to connect the following Keonn products:

  • AdvanMux-8 (eight port RFID multiplexer)
  • AdvanMux-16 (sixteen port RFID multiplexer)
  • AdvanPhaser-2:4 (RFID phase shifter)

to RFID readers of vendors like Impinj, Motorola, Sirit , Alien and ThingMagic.

In this way, the above mentioned Keonn products can be easily controlled by sending simple commands to the reader, without the need of developing software libraries.

 

Business benefits of AdvanGPIO:

  • Very fast and easy connection 
  • Makes it very easy to control Keonn multiplexers and phase shifters by RFID readers
  • Compatible with most reader models
  • Wide input voltage range

Download AdvanGPIO data sheet     

 

Specifications:

Connectors 1 input PoE class I power supply. Type: RJ45
1 input auxiliary supply. Type: receptacle power connector
1 input digital control bits & power supply. Type plug, 6 way
1 input digital control bits:  Type: RJ45
1 output digital control bits & power supply. Type: RJ45
Power supply. Option I: Through PoE class I Pin 4 & 5, pin 7 & 8: Accepts 48 V in either polarity
Power supply. Option II: Through receptacle power connector Pin 1 , pin 2: Accepts from 9 V to 24 V in either polarity
Power supply. Option III: Through plug, 6 way GND pin 6. Vcc pin 5. Accepts from 7 V to 24 V. Reverse polarity protected
‘Reader’ connector 4 input RJ45 connector
‘IN’ connector 4 input plug connector
Current consumption < 15 mA @ 48 V (through PoE)
< 3.5 mA @ Vin = 9 V (through receptacle or plug connectors)
< 4 mA @ Vin = 12 V (through receptacle or plug connectors)
< 4.5 mA @ Vin = 15 V (through receptacle or plug connectors)
< 6 mA @ Vin = 24 V (through receptacle or plug connectors)
Digital inputs 0 V/5 V TTL or open collector
Note 1: B0..B3 are provided with 2.2 kohm pull-up resistors
Note 2: Reader outputs must sink 2 mA (maximum)
Note 3: 3.3 V readers must be 5 V tolerant
Compatibility with RFID UHF readers Impinj, Motorola, Sirit , Alien, ThingMagic 
See User’s guide for more detailed information about specific reader models
Control connection to AdvanMux-8, AdvanMux-16 and AdvanPhaser-2:4 Through standard Ethernet 8-wire UTP cables
Power on indicator White SMD LED
Weight 35 g

Outline dimensions

67 mm x 67 mm x 18 mm
2.6 inches x 2.6 inches x 0.7 inches
Operating temperature -40 °C to 55 °C
Storage temperature -40 °C to 85 °C
EU Directives RoHS compliant (2002/95/EC)
EMC (2004/108/EC)