RFID antennas: Advantenna-p12TM

ADAN-p12EU-FL-200

Advantenna-p12 is a compact RFID UHF 2 elements patch antenna with circular polarization and a radiation pattern characterized by a 60° beam width in the direction of the antenna long edge and 90º in the direction of the antenna short edge.

Advantenna-p12 has a very thin form factor. This allows to integrate the antenna inside thin objects .

Advantenna-p12 is ideal for loss-prevention systems at retail stores. Advantenna-p12 can be embedded inside pedestals of electronic article surveillance (EAS) based on acousto-magnetic technology, transforming such pedestals into hybrid systems that include two technologies simultaneously: acousto-magnetic and RFID.

Business benefits of Advantenna-p12:
  • Slightly narrow beam in the long edge
  • Wide beam in the short edge
  • Very thin form factor
  • Cost effective

Download Advantenna-p12 Datasheet  

Specifications:

Operating Frequency EU Version 865 - 868 MHz (ETSI EN 302 208)
Operating Frequency US Version 902 - 928 MHz (FCC part 15)
Operating Detection distance Up to 3.5 m
Gain

EU version
5.4 dBiC (Typical), 5.5 dBiC (Max) 
3.2 dBiL*

US version
5.6 dBiC (Typical), 5.8 dBiC (Max) 
3.5 dBiL*

Beam width 60° / 90°
Polarization Circular - RHCP (Right Hand Circular Polarization)
Connector SMA or MCX
Flange, flange right angle or edge mount (on the long side of the antenna)
IP rating

Indoor antenna

IP68

Dust resistant, even in high concentration

Immersion resistant (up to 1m for up to 30 minutes)

Temperature range -20°C to +80°C
Size excluding connector 277 mm  x  137 mm  x 3.3 mm  
10.8 inches x 5.4 inches x 0.13 inches
Size with edge mount connector 277 mm  x  137 mm  x 8 mm  
10.8 inches x 5.4 inches x 0.3 inches
Size with flange connector 277 mm  x  137 mm  x 15 mm  
10.8 inches x 5.4 inches x 0.6 inches
Antenna weight 230 g

* Measured at the center of the band